行业组件数据 · 2026

阳极靶

繁體:陽極靶

阳极靶是X射线管中的关键部件,高能电子轰击其表面产生X射线。

技术定义与适配语境
典型 阳极靶 会按材料、尺寸公差、适配关系和失效风险在 计算机、电子和光学产品制造 中评估。

阳极靶是X射线源管中的关键部件,来自阴极的高能电子轰击其表面,通过轫致辐射和特征辐射产生X射线。它通常由高原子序数材料如钨或钼制成,以最大化X射线产生效率和散热能力。 当在阴极和阳极之间施加高电压时,电子加速向阳极靶运动。撞击时,其动能转化为X射线(轫致辐射)和特征辐射,同时产生大量热量,需要高效的冷却系统。

组件规格

定义
阳极靶是X射线源管中的关键部件,来自阴极的高能电子轰击其表面,通过轫致辐射和特征辐射产生X射线。它通常由高原子序数材料如钨或钼制成,以最大化X射线产生效率和散热能力。

当在阴极和阳极之间施加高电压时,电子加速向阳极靶运动。撞击时,其动能转化为X射线(轫致辐射)和特征辐射,同时产生大量热量,需要高效的冷却系统。
工作原理
When high-voltage is applied between cathode and anode, electrons accelerate toward the anode target. Upon impact, their kinetic energy converts to X-rays (bremsstrahlung) and characteristic radiation, while generating significant heat that requires efficient cooling systems.
材料
钨(W)、钼(Mo)或钨铼(W-Re)合金有时带有铜或石墨背衬以散热
Target Angle
6-20 degrees
Maximum Power
1-300 kW
Cooling Method
Water-cooled, oil-cooled, or rotating anode
Focal Spot Size
0.1-2.0 mm
Operating Voltage
20-450 kV
标准
ISO 16526DIN 6814-2

行业分类与别名

阳极靶 的常用贸易名称、技术标识和检索关键词。

上级产品

该组件会出现在以下整机或工业产品中。

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Insufficient cooling->Target melting or cracking->Implement redundant cooling systems and temperature monitoring
Electron beam focusing issues->Uneven target wear and reduced X-ray output->Regular electron optics calibration and beam alignment checks

工业生态与工程逻辑

0
Thermal damage from overheating
1
Target pitting and erosion
2
Cooling system failure
3
Focal spot degradation

合规与检测

tolerance
Focal spot position ±0.1 mm, surface roughness Ra ≤ 0.4 μm
test method
X-ray output measurement per ISO 4037, thermal imaging for heat distribution, metallurgical analysis for material integrity

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

制造商列表用于前期研究和供应商能力理解,不代表认证、排名或交易担保。

采购评估维度

不是客户评论,也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例,不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

常见问题

Why is tungsten commonly used for anode targets?

Tungsten has high atomic number (74) for efficient X-ray production, high melting point (3422°C) to withstand electron bombardment, and good thermal conductivity for heat dissipation.

What is the difference between stationary and rotating anode targets?

Stationary anodes have fixed targets for lower-power applications, while rotating anodes spin to distribute heat over larger surface area, allowing higher power and longer tube life.

我可以直接联系工厂吗?

CNFX 是开放目录,不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。

CNFX Industrial Component Index · 计算机、电子和光学产品制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估,不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息: 阳极靶

说明目标数量、应用场景、交期和关键技术要求,用于准备 RFQ 或供应商评估。

谢谢,信息已发送。
谢谢,信息已收到。

需要制造 阳极靶?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
阳极层
下一个组件
阳极靶盘
URN:CNFX:ME:UNIT:ANODE_TARGET