行业组件数据 · 2026

输出滤波电感

繁體:輸出濾波電感

输出滤波电感是一种用于计算机电源单元(PSU)电压调节模块中的无源电子元件,用于平滑整流后的直流电压。

技术定义与适配语境
典型 输出滤波电感 会按材料、尺寸公差、适配关系和失效风险在 计算机、电子和光学产品制造 中评估。

输出滤波电感是一种无源电子元件,用于计算机电源单元(PSU)电压调节模块中,通过将能量存储在磁场中并在需要时释放,来平滑整流后的直流电压,从而减少纹波和噪声,确保向敏感的计算机组件提供稳定的电力。 其工作原理基于电磁感应:当带有纹波的直流电流通过电感线圈时,会产生磁场并存储能量;当电流试图变化(由于纹波)时,电感通过感应出反向电动势来抵抗这种变化,从而有效滤除高频噪声并平滑输出电压。

组件规格

定义
输出滤波电感是一种无源电子元件,用于计算机电源单元(PSU)电压调节模块中,通过将能量存储在磁场中并在需要时释放,来平滑整流后的直流电压,从而减少纹波和噪声,确保向敏感的计算机组件提供稳定的电力。

其工作原理基于电磁感应:当带有纹波的直流电流通过电感线圈时,会产生磁场并存储能量;当电流试图变化(由于纹波)时,电感通过感应出反向电动势来抵抗这种变化,从而有效滤除高频噪声并平滑输出电压。
工作原理
Operates on electromagnetic induction principles: when DC current with ripple passes through the inductor coil, it creates a magnetic field that stores energy; as current attempts to change (due to ripple), the inductor opposes this change by inducing a back EMF, effectively filtering out high-frequency noise and smoothing the output voltage.
材料
磁芯:铁氧体(锰锌或镍锌)或铁粉导线:铜漆包线(通常为绝缘漆包线)骨架:热塑性塑料(PBT、PET或尼龙)封装:环氧树脂或硅胶用于保护。
Inductance
10 μH to 1000 μH
DC Resistance
5 mΩ to 50 mΩ
Current Rating
5 A to 30 A
Frequency Range
Up to 500 kHz
Saturation Current
Specified at 10-20% above rated current
Operating Temperature
-40°C to +125°C
标准
ISO 9001IEC 62368-1AEC-Q200

行业分类与别名

输出滤波电感 的常用贸易名称、技术标识和检索关键词。

上级产品

该组件会出现在以下整机或工业产品中。

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Core material degradation under high temperature->Reduced inductance, increased ripple voltage->Use high-temperature ferrite cores and ensure adequate thermal management
Wire insulation damage from sharp edges->Short circuit, component failure->Implement proper bobbin design with rounded edges and quality control checks
Excessive ripple current beyond rating->Overheating, thermal runaway->Design with current derating and incorporate overcurrent protection circuits

工业生态与工程逻辑

0
Core saturation leading to inductance drop
1
Overheating due to high current or poor cooling
2
Mechanical damage from vibration
3
Insulation breakdown causing short circuits

合规与检测

tolerance
Inductance tolerance typically ±10% to ±20%; current tolerance based on thermal and saturation limits
test method
Inductance measured via LCR meter at specified frequency; current testing per IEC 62024-2 for saturation; thermal cycling per MIL-STD-202

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

制造商列表用于前期研究和供应商能力理解,不代表认证、排名或交易担保。

采购评估维度

不是客户评论,也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例,不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

常见问题

What is the primary function of an output filter inductor in a PSU?

To smooth the DC output voltage by reducing ripple and noise, ensuring stable power for computer components like CPUs and GPUs.

How does an output filter inductor differ from an input filter inductor?

Output filter inductors handle smoothed DC after regulation, focusing on low-frequency ripple; input filter inductors work on AC input to suppress EMI and harmonics.

What materials are commonly used for the core?

Ferrite cores (Mn-Zn or Ni-Zn) for high-frequency efficiency or powdered iron for high saturation current applications.

我可以直接联系工厂吗?

CNFX 是开放目录,不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。

CNFX Industrial Component Index · 计算机、电子和光学产品制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估,不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息: 输出滤波电感

说明目标数量、应用场景、交期和关键技术要求,用于准备 RFQ 或供应商评估。

谢谢,信息已发送。
谢谢,信息已收到。

需要制造 输出滤波电感?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
输出滤波电容器
下一个组件
输出焊盘
URN:CNFX:ME:UNIT:OUTPUT_FILTER_INDUCTOR