行业组件数据 · 2026

整流二极管

繁體:整流二極體

整流二极管是一种具有P-N结的半导体器件,专门用于通过单向电流将交流电(AC)转换为脉动直流电(DC)。

技术定义与适配语境
典型 整流二极管 会按材料、尺寸公差、适配关系和失效风险在 计算机、电子和光学产品制造 中评估。

整流二极管是一种具有P-N结的半导体器件,专门用于通过单向电流将交流电(AC)转换为脉动直流电(DC)。在检波应用中,它是信号解调、电源整流和电压调节的关键元件,确保为敏感电子电路提供稳定的直流输出。这些二极管的特点是能够处理特定的正向电流、反向电压和开关速度,针对检测系统进行了优化。 整流二极管基于其P-N结的单向导电原理工作。当正向偏置(阳极相对于阴极施加正电压)时,它以最小电阻允许电流通过。当反向偏置时,它阻断电流直至达到击穿电压。在交流电路中,该特性通过仅在正半周期允许电流,将双向交流转换为单向直流,而全波整流器使用桥式配置以利用两个半周期。

组件规格

定义
整流二极管是一种具有P-N结的半导体器件,专门用于通过单向电流将交流电(AC)转换为脉动直流电(DC)。在检波应用中,它是信号解调、电源整流和电压调节的关键元件,确保为敏感电子电路提供稳定的直流输出。这些二极管的特点是能够处理特定的正向电流、反向电压和开关速度,针对检测系统进行了优化。

整流二极管基于其P-N结的单向导电原理工作。当正向偏置(阳极相对于阴极施加正电压)时,它以最小电阻允许电流通过。当反向偏置时,它阻断电流直至达到击穿电压。在交流电路中,该特性通过仅在正半周期允许电流,将双向交流转换为单向直流,而全波整流器使用桥式配置以利用两个半周期。
工作原理
The rectifier diode operates on the principle of unidirectional current flow due to its P-N junction. When forward-biased (positive voltage applied to the anode relative to the cathode), it allows current to pass with minimal resistance. When reverse-biased, it blocks current flow up to its breakdown voltage. In AC circuits, this property converts bidirectional AC into unidirectional DC by permitting current only during the positive half-cycles, with full-wave rectifiers using bridge configurations to utilize both half-cycles.
材料
通常由半导体材料制成如用于通用应用的硅(Si)或用于高温/高频应用的碳化硅(SiC)。P-N结通过掺杂硅形成掺杂元素包括硼(P型)和磷(N型)。封装材料包括环氧树脂、塑料或陶瓷用于绝缘和保护。
Package Type
DO-41, DO-15, SMD
Forward Current (If)
1A to 10A
Reverse Voltage (Vr)
50V to 1000V
Operating Temperature
-55°C to 150°C
Forward Voltage Drop (Vf)
0.7V to 1.2V
Reverse Recovery Time (Trr)
50ns to 500ns
标准
ISO 9001DIN 41773IEC 60747

行业分类与别名

整流二极管 的常用贸易名称、技术标识和检索关键词。

上级产品

该组件会出现在以下整机或工业产品中。

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Exceeding maximum forward current rating->Thermal runaway and diode burnout->Implement current-limiting circuits and heat sinks; use diodes with higher current ratings
Voltage spikes exceeding reverse voltage rating->P-N junction breakdown and short circuit->Add transient voltage suppressors (TVS) or snubber circuits; select diodes with higher Vr ratings
High ambient temperature->Increased leakage current and reduced efficiency->Ensure proper ventilation; use diodes rated for higher temperatures (e.g., SiC diodes)

工业生态与工程逻辑

0
Overheating due to excessive forward current
1
Reverse voltage breakdown causing permanent damage
2
Poor soldering leading to connection failures
3
Environmental contamination affecting performance

合规与检测

tolerance
Forward voltage tolerance ±10%, reverse leakage current < 10µA at rated voltage
test method
IEC 60747-1 for semiconductor devices, including forward/reverse bias testing, thermal cycling, and environmental stress screening

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

制造商列表用于前期研究和供应商能力理解,不代表认证、排名或交易担保。

采购评估维度

不是客户评论,也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例,不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

常见问题

What is the main function of a rectifier diode in a detector?

It converts alternating current (AC) to direct current (DC) to power the detector's electronic circuits and enable signal processing.

How do I select a rectifier diode for a detector application?

Consider the forward current rating, reverse voltage tolerance, switching speed, and operating temperature based on the detector's power requirements and environmental conditions.

Can rectifier diodes be used in high-frequency detector circuits?

Yes, but select diodes with fast reverse recovery times (e.g., Schottky diodes) to minimize switching losses and ensure efficient operation at high frequencies.

我可以直接联系工厂吗?

CNFX 是开放目录,不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。

CNFX Industrial Component Index · 计算机、电子和光学产品制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估,不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息: 整流二极管

说明目标数量、应用场景、交期和关键技术要求,用于准备 RFQ 或供应商评估。

谢谢,信息已发送。
提交失败,请稍后重试;如果反复失败,请直接发邮件到 contact@cnfx.com。

需要制造 整流二极管?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
数据输入(D型触发器)
下一个组件
文本预处理器
URN:CNFX:ME:UNIT:RECTIFIER_DIODE