行业组件数据 · 2026

薄膜晶体管(TFT)阵列

繁體:薄膜電晶體(TFT)陣列

薄膜晶体管(TFT)阵列是一种由数百万个独立TFT像素构成的精密电子矩阵,制作在玻璃基板上。在医疗成像用平板探测器(FPD)中,它作为有源读出层。每个像素包含一个光电二极管(通常为非晶硅),将入射X射线光子转换为电荷,以及一个TFT开关,控制电荷向外部电路的读出。该阵列的高密度和高精度使其能够以低噪声和快速帧率捕获高分辨率数字X射线图像。

技术定义与适配语境
典型 薄膜晶体管(TFT)阵列 会按材料、尺寸公差、适配关系和失效风险在 计算机、电子和光学产品制造 中评估。

薄膜晶体管(TFT)阵列是一种由数百万个独立TFT像素构成的精密电子矩阵,制作在玻璃基板上。在医疗成像用平板探测器(FPD)中,它作为有源读出层。每个像素包含一个光电二极管(通常为非晶硅),将入射X射线光子转换为电荷,以及一个TFT开关,控制电荷向外部电路的读出。该阵列的高密度和高精度使其能够以低噪声和快速帧率捕获高分辨率数字X射线图像。 TFT阵列的工作原理基于光电转换和有源矩阵寻址。当X射线照射到阵列上方的闪烁体层时,产生可见光。该光被每个像素中的光电二极管吸收,产生电子-空穴对并存储电荷。在读出期间,栅极驱动器依次激活TFT行。当TFT导通时,其对应光电二极管中存储的电荷通过TFT传输到数据线,由外部读出电子器件放大并数字化。该过程将X射线强度的空间分布转换为数字图像矩阵。

组件规格

定义
薄膜晶体管(TFT)阵列是一种由数百万个独立TFT像素构成的精密电子矩阵,制作在玻璃基板上。在医疗成像用平板探测器(FPD)中,它作为有源读出层。每个像素包含一个光电二极管(通常为非晶硅),将入射X射线光子转换为电荷,以及一个TFT开关,控制电荷向外部电路的读出。该阵列的高密度和高精度使其能够以低噪声和快速帧率捕获高分辨率数字X射线图像。

TFT阵列的工作原理基于光电转换和有源矩阵寻址。当X射线照射到阵列上方的闪烁体层时,产生可见光。该光被每个像素中的光电二极管吸收,产生电子-空穴对并存储电荷。在读出期间,栅极驱动器依次激活TFT行。当TFT导通时,其对应光电二极管中存储的电荷通过TFT传输到数据线,由外部读出电子器件放大并数字化。该过程将X射线强度的空间分布转换为数字图像矩阵。
工作原理
The TFT Array operates on the principle of photoelectric conversion and active matrix addressing. When X-rays strike the scintillator layer above the array, visible light is produced. This light is absorbed by the photodiodes in each pixel, generating electron-hole pairs and storing electrical charge. During readout, a gate driver sequentially activates rows of TFTs. When a TFT is switched on, the stored charge in its corresponding photodiode is transferred through the TFT to a data line, where it is amplified and digitized by external readout electronics. This process converts the spatial distribution of X-ray intensity into a digital image matrix.
材料
玻璃基板(例如康宁Eagle XG)、用于TFT和光电二极管的非晶硅(a-Si)、用于栅极电介质和钝化层的氮化硅(SiNx)、用于电极和互连的金属层(例如钼、铝)。
Array Size
Up to 43 cm x 43 cm for medical panels
Fill Factor
>70%
Pixel Pitch
100-200 μm
Dark Current
<1 pA per pixel
Readout Time
<200 ms for full frame
Dynamic Range
>14 bits
Number of Pixels
Up to 9 megapixels (e.g., 3000 x 3000)
标准
ISO 9236-1IEC 62220-1DIN 6868-57

行业分类与别名

薄膜晶体管(TFT)阵列 的常用贸易名称、技术标识和检索关键词。

上级产品

该组件会出现在以下整机或工业产品中。

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Contamination during fabrication or thermal mismatch between materials.->Layer delamination leading to open circuits or increased noise.->Implement cleanroom protocols, use materials with matched thermal expansion coefficients, and apply robust passivation layers.
Manufacturing defects or prolonged exposure to high radiation doses.->Pixel defects (dead/stuck pixels) causing artifacts in the medical image.->Employ rigorous testing and pixel correction algorithms, design with radiation-hard materials, and follow dose management protocols.

工业生态与工程逻辑

0
Delamination of layers due to thermal stress
1
Pixel defects (dead or stuck pixels) affecting image quality
2
Degradation of amorphous silicon performance over time
3
Electrostatic discharge (ESD) damage during handling

合规与检测

tolerance
Pixel pitch uniformity within ±2%, geometric distortion <0.5% over entire array, defect pixel clusters limited to <5 contiguous pixels.
test method
ISO 9236-1 for detective quantum efficiency (DQE), IEC 62220-1 for digital X-ray imaging performance, visual inspection for defects, electrical testing of TFT characteristics.

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

制造商列表用于前期研究和供应商能力理解,不代表认证、排名或交易担保。

采购评估维度

不是客户评论,也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例,不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

常见问题

What is the role of the TFT Array in a Flat Panel Detector?

The TFT Array serves as the active readout layer that converts X-ray-induced signals (via a scintillator) into electrical charges at each pixel, which are then sequentially read out to form a digital image.

Why is amorphous silicon commonly used in TFT Arrays for medical imaging?

Amorphous silicon (a-Si) is preferred due to its ability to be deposited uniformly over large glass substrates at relatively low temperatures, its good electronic properties for TFTs and photodiodes, and its cost-effectiveness for large-area applications.

How does pixel pitch affect image quality in a TFT Array?

Smaller pixel pitch increases spatial resolution, allowing finer details to be resolved in the image. However, it may reduce the fill factor and charge collection efficiency, requiring a balance based on the clinical application (e.g., mammography vs. general radiography).

我可以直接联系工厂吗?

CNFX 是开放目录,不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。

CNFX Industrial Component Index · 计算机、电子和光学产品制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估,不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息: 薄膜晶体管(TFT)阵列

说明目标数量、应用场景、交期和关键技术要求,用于准备 RFQ 或供应商评估。

谢谢,信息已发送。
谢谢,信息已收到。

需要制造 薄膜晶体管(TFT)阵列?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
薄膜层
下一个组件
行线
URN:CNFX:ME:UNIT:THIN_FILM_TRANSISTOR_TFT_ARRAY