行业组件数据 · 2026

陶瓷膜层

繁體:陶瓷膜層

高性能陶瓷膜层是一种多孔无机过滤组件,由氧化铝、氧化锆或二氧化钛等材料制成,作为工业级陶瓷膜过滤元件的活性分离屏障。

技术定义与适配语境
典型 陶瓷膜层 会按材料、尺寸公差、适配关系和失效风险在 非金属矿物制品制造 中评估。

高性能陶瓷膜层是一种多孔无机过滤组件,由氧化铝、氧化锆或二氧化钛等材料制成。它作为工业级陶瓷膜过滤元件中的活性分离屏障,设计用于承受极端温度、腐蚀性化学品和高压力差,同时提供精确的颗粒截留和分子分离。 基于尺寸排阻和表面过滤原理。陶瓷膜的精确控制孔结构(通常从微滤到超滤范围)物理阻挡大于其孔径的颗粒、微生物或分子。此外,通过膜表面的吸附或电荷相互作用可实现额外分离,从而在恶劣工业环境中实现澄清、灭菌和浓缩等应用。

组件规格

定义
高性能陶瓷膜层是一种多孔无机过滤组件,由氧化铝、氧化锆或二氧化钛等材料制成。它作为工业级陶瓷膜过滤元件中的活性分离屏障,设计用于承受极端温度、腐蚀性化学品和高压力差,同时提供精确的颗粒截留和分子分离。

基于尺寸排阻和表面过滤原理。陶瓷膜的精确控制孔结构(通常从微滤到超滤范围)物理阻挡大于其孔径的颗粒、微生物或分子。此外,通过膜表面的吸附或电荷相互作用可实现额外分离,从而在恶劣工业环境中实现澄清、灭菌和浓缩等应用。
工作原理
Operates on size-exclusion and surface filtration principles. The ceramic membrane's precisely controlled pore structure (typically ranging from microfiltration to ultrafiltration scales) physically blocks particles, microorganisms, or molecules larger than its pore size. Additional separation can occur through adsorption or charge interactions on the membrane surface, enabling applications like clarification, sterilization, and concentration in harsh industrial environments.
材料
主要材料:高纯度氧化铝(Al2O3)、氧化锆(ZrO2)或二氧化钛(TiO2)。可能包含烧结助剂和粘结剂。材料等级指定纯度(例如99.5% Al2O3)、粒度分布和相组成(例如α-氧化铝)。可施加涂层或表面改性(例如硅烷)以增强亲水性/疏水性或耐化学性。
Porosity
30-50%
pH Range
0-14
Pore Size
0.01-1.0 μm (typically 0.1 μm for MF, 0.01 μm for UF)
Thickness
20-100 μm (active layer)
Pressure Rating
Up to 10 bar (varies by support structure)
Pure Water Flux
500-2000 L/m²·h·bar (at 25°C)
Operating Temperature
-20 to 400°C
标准
ISO 2941:2020ISO 8637:2018DIN 25490ASTM E128

行业分类与别名

陶瓷膜层 的常用贸易名称、技术标识和检索关键词。

上级产品

该组件会出现在以下整机或工业产品中。

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Thermal stress during cleaning or process fluctuations->Cracking or delamination of the ceramic layer->Implement controlled heating/cooling rates; use thermal shock-resistant materials like zirconia-toughened alumina; design with compressive layers.
Exposure to incompatible chemicals (e.g., HF, hot concentrated alkali)->Corrosion or dissolution of ceramic material, leading to increased pore size or leakage->Select material based on chemical compatibility charts; apply protective coatings; monitor pH and concentration in process streams.
Particulate abrasion from high-velocity feed streams->Erosion of membrane surface, loss of separation efficiency->Install pre-filtration to remove large abrasives; optimize cross-flow velocity; use wear-resistant materials like silicon carbide composites.

工业生态与工程逻辑

0
Thermal shock cracking if heated/cooled too rapidly
1
Mechanical failure from particulate abrasion or pressure surges
2
Pore blockage from irreversible fouling or scaling
3
Chemical attack from hydrofluoric acid or strong phosphoric acid

合规与检测

tolerance
Pore size tolerance ±10%; dimensional tolerances per ISO 2768-m; flatness < 0.1 mm over 100 mm
test method
Pore size distribution via bubble point test (ASTM F316); integrity test via pressure hold/diffusive flow; material composition via XRD/XRF; mechanical strength via 3-point bend test (ISO 14704).

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

制造商列表用于前期研究和供应商能力理解,不代表认证、排名或交易担保。

采购评估维度

不是客户评论,也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例,不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

常见问题

What is the typical lifespan of a ceramic membrane layer?

With proper cleaning and maintenance, ceramic membrane layers can last 5-10 years, significantly longer than polymeric membranes, due to their resistance to fouling, chemicals, and thermal stress.

How is the pore size of a ceramic membrane layer controlled?

Pore size is controlled during manufacturing through precise selection of ceramic powder particle size, sintering temperature and time, and use of pore-forming agents. Advanced techniques like sol-gel processes allow for nanometer-scale pore tuning.

Can ceramic membrane layers be cleaned aggressively?

Yes, ceramic membranes tolerate aggressive cleaning methods including backflushing, steam sterilization, acid/alkali cleaning (pH 0-14), and oxidants like sodium hypochlorite, which helps restore flux and extend service life.

我可以直接联系工厂吗?

CNFX 是开放目录,不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。

CNFX Industrial Component Index · 非金属矿物制品制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估,不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息: 陶瓷膜层

说明目标数量、应用场景、交期和关键技术要求,用于准备 RFQ 或供应商评估。

谢谢,信息已发送。
提交失败,请稍后重试;如果反复失败,请直接发邮件到 contact@cnfx.com。

需要制造 陶瓷膜层?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
陶瓷基粉末
下一个组件
陶瓷辊体
URN:CNFX:ME:UNIT:CERAMIC_MEMBRANE_LAYER