行业组件数据 · 2026

保护二极管

繁體:保護二極體

一种半导体器件,集成在输出驱动电路中,用于防止瞬态过电压、静电放电(ESD)和反向电流造成的损坏,通过提供低阻抗路径将多余能量泄放到地或钳位电压至安全水平。

技术定义与适配语境
典型 保护二极管 会按材料、尺寸公差、适配关系和失效风险在 计算机、电子和光学产品制造 中评估。

一种半导体器件,集成在输出驱动电路中,用于防止瞬态过电压事件、静电放电(ESD)和反向电流造成的损坏,其方式是为多余能量提供低阻抗路径至地,或将电压钳位至安全水平。 基于PN结特性工作:在正常条件下,它保持反向偏置,具有高阻抗;在过电压事件期间,它发生雪崩击穿或齐纳击穿,将多余电流从敏感元件旁路,同时通过正向导通阻止反向极性电流流向非预期方向。

组件规格

定义
一种半导体器件,集成在输出驱动电路中,用于防止瞬态过电压事件、静电放电(ESD)和反向电流造成的损坏,其方式是为多余能量提供低阻抗路径至地,或将电压钳位至安全水平。

基于PN结特性工作:在正常条件下,它保持反向偏置,具有高阻抗;在过电压事件期间,它发生雪崩击穿或齐纳击穿,将多余电流从敏感元件旁路,同时通过正向导通阻止反向极性电流流向非预期方向。
工作原理
Operates based on PN junction characteristics: under normal conditions, it remains reverse-biased with high impedance; during overvoltage events, it avalanches or zener-breaks down to conduct excess current away from sensitive components, while also blocking reverse polarity currents through forward conduction in unintended directions.
材料
硅(Si)或砷化镓(GaAs)半导体晶圆具有掺杂区域封装在环氧树脂或陶瓷封装中引线为镀镍铜引线。
Package Type
SOD-123, SMA, SMB
Response Time
<1ns
Clamping Voltage
Specified at rated current
Breakdown Voltage
5V to 200V
Peak Pulse Current
Up to 100A
Operating Temperature
-55°C to +150°C
标准
ISO 16750-2DIN EN 61000-4-2

行业分类与别名

保护二极管 的常用贸易名称、技术标识和检索关键词。

上级产品

该组件会出现在以下整机或工业产品中。

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Voltage transient exceeds diode's clamping capability->Diode breakdown, allowing overvoltage to damage downstream components->Select diodes with higher surge ratings and implement additional protection layers like varistors
Poor solder joint or mechanical stress->Intermittent connection or open circuit, disabling protection->Use automated soldering processes and strain relief in mounting
Reverse polarity connection during maintenance->Diode forward-biases, creating a short circuit and potential fire hazard->Clear polarity markings and training for technicians

工业生态与工程逻辑

0
Incorrect voltage rating leading to inadequate protection
1
Thermal overload from sustained overcurrent
2
Installation polarity errors causing short circuits

合规与检测

tolerance
±5% on breakdown voltage, ±10% on clamping voltage under specified test conditions
test method
ESD immunity testing per IEC 61000-4-2, surge testing per ISO 7637-2

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

制造商列表用于前期研究和供应商能力理解,不代表认证、排名或交易担保。

采购评估维度

不是客户评论,也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例,不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

常见问题

What is the primary function of a protection diode in an output driver circuit?

To divert transient overvoltages and block reverse currents, preventing damage to transistors, ICs, and other sensitive components in industrial machinery.

How do I select the right protection diode for my application?

Consider the circuit's operating voltage, expected surge energy, response time requirements, and environmental conditions, ensuring the diode's breakdown voltage exceeds normal operating levels and its current rating handles worst-case transients.

Can a protection diode fail, and what are common failure modes?

Yes, failures include thermal runaway from excessive current, avalanche breakdown degradation, or mechanical damage from vibration; regular inspection and proper heatsinking mitigate these risks.

我可以直接联系工厂吗?

CNFX 是开放目录,不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。

CNFX Industrial Component Index · 计算机、电子和光学产品制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估,不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息: 保护二极管

说明目标数量、应用场景、交期和关键技术要求,用于准备 RFQ 或供应商评估。

谢谢,信息已发送。
谢谢,信息已收到。

需要制造 保护二极管?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
侧板/机柜
下一个组件
保护二极管
URN:CNFX:ME:UNIT:PROTECTION_DIODE