行业组件数据 · 2026

保护二极管

繁體:保護二極體

保护二极管是集成在线路驱动器/接收器电路中的半导体元件,用于防止瞬态过电压、静电放电(ESD)和反向电流。

技术定义与适配语境
典型 保护二极管 会按材料、尺寸公差、适配关系和失效风险在 计算机、电子和光学产品制造 中评估。

保护二极管是集成在线路驱动器/接收器电路中的半导体元件,用于防止瞬态过电压事件、静电放电(ESD)和反向电流。它们通过为多余电压提供低阻抗路径到地或阻断反向电流,防止敏感集成电路受损,并确保工业通信系统中的信号完整性。 保护二极管基于半导体结特性工作。对于过电压保护(如TVS二极管),在正常工作时保持高阻抗,但当电压超过阈值时迅速钳位到低阻抗状态,将多余能量泄放到地。对于反极性保护,肖特基二极管阻断反向电流,同时允许正向电流以最小压降通过。

组件规格

定义
保护二极管是集成在线路驱动器/接收器电路中的半导体元件,用于防止瞬态过电压事件、静电放电(ESD)和反向电流。它们通过为多余电压提供低阻抗路径到地或阻断反向电流,防止敏感集成电路受损,并确保工业通信系统中的信号完整性。

保护二极管基于半导体结特性工作。对于过电压保护(如TVS二极管),在正常工作时保持高阻抗,但当电压超过阈值时迅速钳位到低阻抗状态,将多余能量泄放到地。对于反极性保护,肖特基二极管阻断反向电流,同时允许正向电流以最小压降通过。
工作原理
Protection diodes operate based on semiconductor junction properties. For overvoltage protection (like TVS diodes), they remain high-impedance during normal operation but rapidly clamp to a low-impedance state when voltage exceeds a threshold, diverting excess energy to ground. For reverse polarity protection, Schottky diodes block current flow in the reverse direction while allowing forward current with minimal voltage drop.
材料
硅(Si)或砷化镓(GaAs)半导体晶圆带有掺杂区域封装在环氧树脂或陶瓷封装中带有金属引线(例如DO-214、SOD-123)。
Package Type
SMD or Through-Hole
Response Time
<1ns
Clamping Voltage
6.5V to 330V
Breakdown Voltage
5V to 200V
Peak Pulse Current
Up to 100A
Operating Temperature
-55°C to +150°C
标准
ISO 7637-2IEC 61000-4-2AEC-Q101

行业分类与别名

保护二极管 的常用贸易名称、技术标识和检索关键词。

上级产品

该组件会出现在以下整机或工业产品中。

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Voltage spike exceeding diode rating->Diode short circuit or open circuit->Select diodes with appropriate clamping voltage and surge rating; implement redundant protection circuits
Excessive heat due to continuous overvoltage->Thermal degradation and permanent damage->Incorporate thermal management (heat sinks) and current-limiting resistors

工业生态与工程逻辑

0
Incorrect voltage rating causing component failure
1
Slow response time failing to protect against fast transients
2
Thermal runaway under continuous overvoltage

合规与检测

tolerance
±5% breakdown voltage tolerance
test method
ESD testing per IEC 61000-4-2 (Level 4: 8kV contact, 15kV air discharge), surge testing per ISO 7637-2

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

制造商列表用于前期研究和供应商能力理解,不代表认证、排名或交易担保。

采购评估维度

不是客户评论,也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例,不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

常见问题

What is the difference between TVS diodes and Zener diodes for protection?

TVS diodes are designed for transient suppression with faster response times and higher surge capacity, while Zener diodes provide voltage regulation with lower power handling. TVS diodes are preferred for ESD and lightning protection in industrial applications.

How do protection diodes affect signal integrity in line drivers?

Properly selected protection diodes have minimal impact on signal integrity due to low capacitance (<5pF) and fast response. They prevent distortion by clamping transient spikes without interfering with normal signal transmission.

我可以直接联系工厂吗?

CNFX 是开放目录,不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。

CNFX Industrial Component Index · 计算机、电子和光学产品制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估,不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息: 保护二极管

说明目标数量、应用场景、交期和关键技术要求,用于准备 RFQ 或供应商评估。

谢谢,信息已发送。
谢谢,信息已收到。

需要制造 保护二极管?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
保护二极管
下一个组件
保护层
URN:CNFX:ME:UNIT:PROTECTION_DIODES