行业组件数据 · 2026

反馈网络(电阻)

繁體:反饋網路(電阻)

由电阻组成的反馈网络是功率转换电路(如DC-DC转换器或电压调节器)中的关键部件,构成控制环路的一部分,用于监测输出电压或电流并向控制IC提供反馈信号。

技术定义与适配语境
典型 反馈网络(电阻) 会按材料、尺寸公差、适配关系和失效风险在 电气设备制造 中评估。

由电阻组成的反馈网络是功率转换电路(如DC-DC转换器或电压调节器)中的关键部件。它构成控制环路的一部分,用于监测输出电压或电流,并向控制IC提供反馈信号。该网络通过调节占空比或开关频率,在负载变化时维持稳定的输出,确保精确调节、提高效率,并防止过压或过流。 反馈网络通过使用电阻形成分压器来采样输出电压。采样电压与控制IC内部的参考电压进行比较。任何偏差都会产生误差信号,该信号调节开关元件(如MOSFET)以校正输出。在电流模式控制中,它还可以通过分流电阻感测电流。网络的电阻值决定了反馈环路的增益、带宽和稳定性,影响瞬态响应和抗噪能力。

组件规格

定义
由电阻组成的反馈网络是功率转换电路(如DC-DC转换器或电压调节器)中的关键部件。它构成控制环路的一部分,用于监测输出电压或电流,并向控制IC提供反馈信号。该网络通过调节占空比或开关频率,在负载变化时维持稳定的输出,确保精确调节、提高效率,并防止过压或过流。

反馈网络通过使用电阻形成分压器来采样输出电压。采样电压与控制IC内部的参考电压进行比较。任何偏差都会产生误差信号,该信号调节开关元件(如MOSFET)以校正输出。在电流模式控制中,它还可以通过分流电阻感测电流。网络的电阻值决定了反馈环路的增益、带宽和稳定性,影响瞬态响应和抗噪能力。
工作原理
The feedback network operates by creating a voltage divider using resistors to sample the output voltage. This sampled voltage is compared to a reference voltage within the control IC. Any deviation generates an error signal, which adjusts the switching elements (e.g., MOSFETs) to correct the output. In current-mode control, it may also sense current through a shunt resistor. The network's resistor values determine the gain, bandwidth, and stability of the feedback loop, influencing transient response and noise immunity.
材料
电阻:通常由厚膜或薄膜陶瓷(例如氧化钌)制成位于氧化铝基板上带有镍阻挡层和锡铅或无铅焊料镀层。基板:用于PCB的FR4玻璃纤维环氧树脂。连接器:铜合金镀金或镀锡。封装:环氧树脂或硅胶用于保护。
Power Rating
0.125W to 1W
Voltage Rating
Up to 200V
Resistance Tolerance
±1% to ±5%
Operating Temperature
-55°C to +155°C
Temperature Coefficient
±100 ppm/°C
标准
ISO 9001IEC 60115IPC-A-610

行业分类与别名

反馈网络(电阻) 的常用贸易名称、技术标识和检索关键词。

上级产品

该组件会出现在以下整机或工业产品中。

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Overheating from high current or poor ventilation->Resistor degradation or open circuit->Use resistors with adequate power rating, implement thermal management, and design with derating guidelines.
Manufacturing defects or contamination->Short circuit or unstable resistance->Apply quality control per IEC 60115, use automated optical inspection (AOI), and conduct burn-in testing.
Environmental factors like humidity or vibration->Corrosion or mechanical damage->Apply conformal coating, use ruggedized components, and design for shock/vibration resistance.

工业生态与工程逻辑

0
Thermal runaway due to excessive power dissipation
1
Noise interference affecting regulation accuracy
2
Component aging leading to drift in resistance values

合规与检测

tolerance
Resistance tolerance typically ±1% to ±5%, with tighter tolerances for precision applications
test method
Testing per IEC 60115 for resistance, power rating, and temperature coefficient; in-circuit testing for functionality; environmental testing for reliability.

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

制造商列表用于前期研究和供应商能力理解,不代表认证、排名或交易担保。

采购评估维度

不是客户评论,也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例,不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

常见问题

What is the purpose of a feedback network in a power conversion circuit?

It provides a feedback signal to the control IC to regulate output voltage or current, ensuring stability and efficiency under varying loads.

How do resistor values affect the feedback network?

Resistor values set the gain and bandwidth of the control loop, impacting stability, transient response, and noise rejection.

Can feedback networks be used in AC-DC converters?

Yes, they are commonly used in both AC-DC and DC-DC converters to maintain regulated output.

我可以直接联系工厂吗?

CNFX 是开放目录,不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。

CNFX Industrial Component Index · 电气设备制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估,不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息: 反馈网络(电阻)

说明目标数量、应用场景、交期和关键技术要求,用于准备 RFQ 或供应商评估。

谢谢,信息已发送。
提交失败,请稍后重试;如果反复失败,请直接发邮件到 contact@cnfx.com。

需要制造 反馈网络(电阻)?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
反馈网络(分压器)
下一个组件
发射极端子
URN:CNFX:ME:UNIT:FEEDBACK_NETWORK_RESISTORS_