行业组件数据 · 2026

测试夹具接口

Interface component connecting test fixtures to industrial power distribution test benches for electrical parameter measurement and safety verification.

技术定义与适配语境
典型 测试夹具接口 会按材料、尺寸公差、适配关系和失效风险在 电气设备制造 中评估。

A precision-engineered interface component designed to establish secure electrical and mechanical connections between modular test fixtures and industrial power distribution test benches. It facilitates accurate measurement of voltage, current, power factor, insulation resistance, and ground continuity while ensuring operator safety through integrated isolation and protection mechanisms.

查看完整规格 查看制造来源

组件规格

定义
A precision-engineered interface component designed to establish secure electrical and mechanical connections between modular test fixtures and industrial power distribution test benches. It facilitates accurate measurement of voltage, current, power factor, insulation resistance, and ground continuity while ensuring operator safety through integrated isolation and protection mechanisms.
工作原理
Operates by providing standardized electrical pathways and mechanical alignment between the test bench's measurement system and the device under test (DUT). Incorporates spring-loaded contacts, precision alignment pins, and safety interlocks to ensure reliable connections. Electrical signals pass through calibrated shunt resistors, voltage dividers, and isolation transformers for accurate measurement while preventing hazardous voltages from reaching operators.
材料
High-strength engineering plastic (PBT-GF30) housingberyllium copper spring contacts with gold plating (0.5μm)stainless steel alignment pins (AISI 304)silicone insulation barriersand flame-retardant cable assemblies (UL94 V-0 rated).
IP Rating
IP54
Voltage Rating
0-1000V AC/DC
Connection Type
Modular quick-connect
Mechanical Life
>50,000 mating cycles
Current Capacity
0-200A continuous
Safety Standards
IEC 61010-1, UL 61010-1
Contact Resistance
<5mΩ per contact
Insulation Resistance
>100MΩ at 500VDC
Operating Temperature
-20°C to +85°C
标准
ISO 17025IEC 61010-1UL 61010-1DIN EN 61326-1

行业分类与别名

测试夹具接口 的常用贸易名称、技术标识和检索关键词。

test fixture interfacepower distribution test benchelectrical testing equipmentsafety interlockmeasurement interfaceindustrial testing components测试夹具接口Test Fixture Interface电气设备制造 测试夹具接口

上级产品

该组件会出现在以下整机或工业产品中。

自动化计算机主板老化测试仪
用于在受控热学和电气条件下对计算机主板进行应力测试的工业设备。
查看产品详情 ->
工业配电测试台
用于配电与控制装置全面测试的独立式机器
查看产品详情 ->

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Contact surface contamination or oxidation->Increased contact resistance leading to measurement errors->Regular cleaning with approved contact cleaners and preventive maintenance schedules
Mechanical wear from frequent connections->Loose connections causing intermittent measurements->Implement usage tracking and replace components after specified mating cycles
Overcurrent conditions->Thermal damage to contacts and insulation->Integrate current monitoring and automatic disconnection systems

工业生态与工程逻辑

兼容对象
Industrial Power Distribution Test BenchesElectrical Safety TestersPower Quality Analyzers
可替换件
ChromaKeysightHiokiMeggerFluke
0
Electrical shock from improper insulation
1
Measurement inaccuracies due to contact degradation
2
Mechanical failure from repeated mating cycles
3
Thermal overload in high-current applications

合规与检测

tolerance
±0.5% for voltage measurements, ±1% for current measurements, ±2° for mechanical alignment
test method
Verification per IEC 61010-1 using calibrated reference standards, insulation resistance testing at 500VDC, dielectric withstand testing at 1500VAC for 60 seconds

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

添加你的工厂

制造商列表用于前期研究和供应商能力理解，不代表认证、排名或交易担保。

采购评估维度

不是客户评论，也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例，不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

添加剂包
Specialized additive package for electrical insulation varnish compounds to enhance performance and durability.
对准系统
Precision alignment system for industrial wireless power transfer modules ensuring optimal energy coupling efficiency.
环境光传感器
Ambient light sensor for automatic LED lighting adjustment based on environmental brightness
放大器级
Amplifier stage is an electronic circuit component that increases signal power in gate drivers and relay coils for industrial control systems.
阳极端子
Anode terminal is the positive electrode connection point in power semiconductor devices like IGBTs and SCRs, facilitating current flow and heat dissipation.
阳极/阴极端子
Anode and cathode terminals are critical electrical connection points in thyristors and triacs that control current flow direction and device triggering.

常见问题

What is the primary function of a test fixture interface?

To provide safe, reliable electrical and mechanical connections between test fixtures and power distribution test benches, enabling accurate measurement of electrical parameters while protecting operators and equipment.

How often should test fixture interfaces be calibrated?

Annual calibration is recommended for most industrial applications, or according to ISO 17025 requirements. More frequent verification may be needed in high-precision or safety-critical applications.

Can these interfaces be used with different test bench brands?

While designed for specific systems, many interfaces follow industry-standard dimensions and electrical specifications, allowing cross-compatibility with proper verification of electrical and safety parameters.

我可以直接联系工厂吗？

CNFX 是开放目录，不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。
CNFX Industrial Component Index · 电气设备制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估，不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息： 测试夹具接口

说明目标数量、应用场景、交期和关键技术要求，用于准备 RFQ 或供应商评估。

谢谢，信息已发送。
谢谢，信息已收到。

需要制造 测试夹具接口?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
泄放电阻（可选）
下一个组件
测试按钮
URN:CNFX:ME:UNIT:TEST_FIXTURE_INTERFACE