行业组件数据 · 2026

二极管桥

繁體:二極體橋

二极管桥,又称桥式整流器,是一种基础电力电子元件,由四个二极管按Graetz桥式电路排列组成。

技术定义与适配语境
典型 二极管桥 会按材料、尺寸公差、适配关系和失效风险在 电气设备制造 中评估。

二极管桥,又称桥式整流器,是一种基础电力电子元件,由四个二极管按Graetz桥式电路排列组成。它通过将交流输入波形的正负半周转换为脉动直流输出,实现全波整流。该元件在电源、电机驱动及各种需要从交流电源获得稳定直流电的工业设备中的整流电路中至关重要。 二极管桥基于全波整流原理工作。当施加交流电压时,二极管在交替的半周期内成对导通:在正半周期,两个二极管正向偏置并沿一个方向导通电流;在负半周期,另外两个二极管导通,保持通过负载的电流方向相同。这导致输出为连续脉动直流,其频率是输入交流信号的两倍。

组件规格

定义
二极管桥,又称桥式整流器,是一种基础电力电子元件,由四个二极管按Graetz桥式电路排列组成。它通过将交流输入波形的正负半周转换为脉动直流输出,实现全波整流。该元件在电源、电机驱动及各种需要从交流电源获得稳定直流电的工业设备中的整流电路中至关重要。

二极管桥基于全波整流原理工作。当施加交流电压时,二极管在交替的半周期内成对导通:在正半周期,两个二极管正向偏置并沿一个方向导通电流;在负半周期,另外两个二极管导通,保持通过负载的电流方向相同。这导致输出为连续脉动直流,其频率是输入交流信号的两倍。
工作原理
The diode bridge operates on the principle of full-wave rectification. When AC voltage is applied, diodes conduct in pairs during alternating half-cycles: during the positive half-cycle, two diodes become forward-biased and conduct current in one direction; during the negative half-cycle, the other two diodes conduct, maintaining the same current direction through the load. This results in a continuous pulsating DC output with twice the frequency of the input AC signal.
材料
半导体硅(Si)或碳化硅(SiC)用于高温应用铜或铝端子环氧树脂或陶瓷封装用于绝缘和热管理。
Mounting Type
Through-hole (e.g., TO-220, TO-247) or surface mount (e.g., D2PAK, DPAK)
Peak Reverse Voltage
100–1600 VV
Operating Temperature Range
-55 to +150°C
Maximum Forward Voltage Drop
0.8–1.2 (Si), 1.5–2.0 (SiC)V
Maximum Average Rectified Current
1–100A
Material
Silicon (Si) or Silicon Carbide (SiC)
Terminal Material
Copper (C11000) or aluminum (6061-T6)
Encapsulation Material
Epoxy (e.g., FR-4) or ceramic (Al2O3)
Isolation Voltage
1500–4000Vrms
Thermal Resistance (Junction to Case)
0.5–5.0°C/W
Surge Current Capability
50–500A
Reverse Recovery Time
20–100 (Si), <10 (SiC)ns
Ambient temperature
-40 to +85 °C
Junction temperature
-55 to +150 °C (Si), -55 to +200 °C (SiC)
Forward current (average)
Up to rated current at case temp ≤100°C
Reverse voltage (peak)
Up to rated VRRM
Surge current (non-repetitive)
Up to rated surge current for 10 ms
标准
IEC 60747-2ASTM B187

行业分类与别名

二极管桥 的常用贸易名称、技术标识和检索关键词。

上级产品

该组件会出现在以下整机或工业产品中。

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Overcurrent conditions exceeding rated specifications->Thermal destruction of semiconductor junctions->Implement current limiting circuits and proper heat sinking
Voltage transients or spikes in AC input->Reverse breakdown and short circuit->Use transient voltage suppression diodes and proper input filtering

工业生态与工程逻辑

0
Thermal runaway due to excessive current
1
Reverse voltage breakdown
2
Mechanical stress on solder joints
3
Electromagnetic interference generation

合规与检测

tolerance
±5% on forward voltage drop, ±10% on reverse leakage current
test method
IEC 60747-1 semiconductor device testing, including forward voltage, reverse current, and thermal cycling tests

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

制造商列表用于前期研究和供应商能力理解,不代表认证、排名或交易担保。

采购评估维度

不是客户评论,也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例,不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

常见问题

What is the difference between a diode bridge and a single diode rectifier?

A diode bridge provides full-wave rectification using all AC waveform halves, while a single diode provides half-wave rectification using only one half, making bridges more efficient with higher output voltage and reduced ripple.

Can diode bridges handle high-frequency AC inputs?

Standard silicon diode bridges are optimized for 50/60Hz power frequencies. For high-frequency applications, fast recovery or Schottky diode bridges with lower reverse recovery time are required.

我可以直接联系工厂吗?

CNFX 是开放目录,不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。

CNFX Industrial Component Index · 电气设备制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估,不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息: 二极管桥

说明目标数量、应用场景、交期和关键技术要求,用于准备 RFQ 或供应商评估。

谢谢,信息已发送。
提交失败,请稍后重试;如果反复失败,请直接发邮件到 contact@cnfx.com。

需要制造 二极管桥?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
二极管
下一个组件
二极管芯片
URN:CNFX:ME:UNIT:DIODE_BRIDGE