行业组件数据 · 2026

枪机框导轨

Precision-machined channel in firearm receivers that guides bolt carrier group movement during firing cycle.

技术定义与适配语境
典型 枪机框导轨 会按材料、尺寸公差、适配关系和失效风险在 机械和设备制造 中评估。

The Bolt Carrier Group Channel is a critical structural feature machined into firearm receivers (typically upper receivers in AR-platform firearms) that provides a precisely aligned pathway for the bolt carrier group to travel during the firing sequence. This channel ensures proper alignment, reduces friction, and maintains consistent cycling by controlling the linear motion of the bolt carrier group components.

查看完整规格 查看制造来源

组件规格

定义
The Bolt Carrier Group Channel is a critical structural feature machined into firearm receivers (typically upper receivers in AR-platform firearms) that provides a precisely aligned pathway for the bolt carrier group to travel during the firing sequence. This channel ensures proper alignment, reduces friction, and maintains consistent cycling by controlling the linear motion of the bolt carrier group components.
工作原理
The channel operates on the principle of constrained linear guidance, where the machined surfaces provide low-friction contact points that direct the bolt carrier group's rearward and forward movement during recoil and return cycles. This ensures consistent timing, proper headspacing, and reliable extraction/ejection by maintaining alignment between the bolt, barrel extension, and firing mechanism.
材料
Typically machined from 7075-T6 aluminum alloy (for lightweight receivers) or 4140/4150 steel (for enhanced durability)with surface treatments including Type III hardcoat anodizing (for aluminum) or nitriding/QPQ (for steel) to improve wear resistance and corrosion protection.
Parallelism
0.0005 inches (0.0127 mm) per inch of length
Channel Depth
0.625-0.635 inches (15.88-16.13 mm)
Channel Width
0.996-1.002 inches (25.3-25.45 mm)
Surface Finish
Ra 32 μin (0.8 μm) or better
Straightness Tolerance
0.001 in/inch (0.001 mm/mm)
标准
ISO 9001SAE AMS 2750MIL-A-8625

行业分类与别名

枪机框导轨 的常用贸易名称、技术标识和检索关键词。

bolt carrier group channelfirearm receiver machiningBCG guide railsprecision firearm componentsreceiver channel specificationsindustrial firearms manufacturing枪机框导轨Bolt Carrier Group Channel机械和设备制造 枪机框导轨

上级产品

该组件会出现在以下整机或工业产品中。

机匣
战术半自动步枪的核心结构部件，用于容纳击发机构并为其他组件提供安装点。
查看产品详情 ->

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Improper machining alignment or tool wear->Channel misalignment causing binding or failure to cycle->Implement statistical process control (SPC), regular tool calibration, and coordinate measuring machine (CMM) verification
Inadequate surface treatment or material defects->Premature wear or corrosion compromising channel integrity->Material certification, proper heat treatment validation, and coating thickness verification per MIL-A-8625
Thermal expansion mismatch between channel and bolt carrier group->Binding during rapid fire or temperature extremes->Material selection optimization, thermal analysis, and clearance optimization for operating temperature ranges

工业生态与工程逻辑

兼容对象
AR-15/M4 platform receiversAR-10/SR-25 platform receiversCustom precision rifle receivers
可替换件
ColtDaniel DefenseBCMAero PrecisionFN Herstal
0
Dimensional inaccuracies causing binding or failure to cycle
1
Surface imperfections leading to accelerated wear
2
Material fatigue under high-cycle conditions
3
Corrosion in harsh environments

合规与检测

tolerance
±0.001 inches (0.0254 mm) for critical dimensions, surface finish Ra ≤ 32 μin
test method
CMM measurement per ASME Y14.5, surface profilometry per ISO 4287, functional cycling test with certified gauges

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

添加你的工厂

制造商列表用于前期研究和供应商能力理解，不代表认证、排名或交易担保。

采购评估维度

不是客户评论，也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例，不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

磨料颗粒
Hard, sharp particles used in grinding wheels for material removal and surface finishing in industrial applications.
磨料入口端口
Abrasive inlet port is a precision component in blast chambers that controls abrasive media entry for surface treatment processes.
研磨层
Abrasive layer is the active surface component of grinding plates that performs material removal through friction and cutting action.
磨料介质/工作面
Abrasive media for surface finishing, polishing, and material removal in industrial applications.
检修盖
A removable cover providing access to internal components of a draft gear housing for maintenance and inspection.
样品室检修门
Access door for sample chambers providing secure entry while maintaining environmental isolation.

常见问题

What is the primary function of the bolt carrier group channel?

It provides precise linear guidance for the bolt carrier group during the firing cycle, ensuring proper alignment, reducing friction, and maintaining reliable operation.

Why are dimensional tolerances critical for this component?

Tight tolerances ensure smooth cycling, prevent binding or excessive wear, maintain headspacing accuracy, and ensure compatibility with standardized bolt carrier groups.

What materials are commonly used for manufacturing these channels?

7075-T6 aluminum for lightweight applications with hardcoat anodizing, or 4140/4150 steel with nitriding treatments for enhanced durability in high-volume or extreme conditions.

我可以直接联系工厂吗？

CNFX 是开放目录，不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。
CNFX Industrial Component Index · 机械和设备制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估，不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息： 枪机框导轨

说明目标数量、应用场景、交期和关键技术要求，用于准备 RFQ 或供应商评估。

谢谢，信息已发送。
谢谢，信息已收到。

需要制造 枪机框导轨?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
枪托
下一个组件
枪机组件
URN:CNFX:ME:UNIT:BOLT_CARRIER_GROUP_CHANNEL