行业组件数据 · 2026

连接器/电缆

Industrial-grade connector and cable assemblies for reliable signal and power transmission in control sensor systems.

技术定义与适配语境
典型 连接器/电缆 会按材料、尺寸公差、适配关系和失效风险在 机械和设备制造 中评估。

A connector/cable assembly is a critical electrical component designed to establish secure, durable connections between control sensors and control units or data acquisition systems in industrial machinery. It ensures the transmission of analog/digital signals, power, and sometimes data with minimal interference, resistance, or signal degradation. These assemblies are engineered to withstand harsh industrial environments, including vibration, temperature extremes, moisture, and electromagnetic interference (EMI).

查看完整规格 查看制造来源

组件规格

定义
A connector/cable assembly is a critical electrical component designed to establish secure, durable connections between control sensors and control units or data acquisition systems in industrial machinery. It ensures the transmission of analog/digital signals, power, and sometimes data with minimal interference, resistance, or signal degradation. These assemblies are engineered to withstand harsh industrial environments, including vibration, temperature extremes, moisture, and electromagnetic interference (EMI).
工作原理
The connector/cable assembly operates by providing a physical and electrical interface between mating connectors. Conductors within the cable carry electrical signals or power from the sensor to the destination. The connector ensures proper pin alignment, secure mechanical locking, and environmental sealing to maintain electrical continuity and protect against contaminants. Shielding within the cable may be used to reduce EMI/RFI noise, ensuring signal integrity.
材料
Connector housing: Thermoplastic (e.g.PBTPA)metal (e.g.brassstainless steel) for rugged applications. Contacts: Copper alloy (e.g.phosphor bronze) with plating (e.g.goldtinnickel) for corrosion resistance and conductivity. Cable: Insulation (e.g.PVCPURTPE)conductors (stranded copper)shielding (braided or foil)and outer jacket (abrasion-resistant material). Seals: Silicone or rubber grommets for IP-rated protection.
IP Rating
IP67/IP68
Shielding
Yes (braided or foil)
Cable Gauge
AWG 22 to 16
Bending Radius
Minimum 5x cable diameter
Connector Type
M12, M8, 7/8", rectangular
Current Rating
Up to 10A per contact
Voltage Rating
Up to 300V AC/DC
Temperature Range
-40°C to +105°C
Number of Contacts
3 to 8 pins
标准
ISO 4400IEC 61076-2DIN 43650

行业分类与别名

连接器/电缆 的常用贸易名称、技术标识和检索关键词。

industrial connectorsensor cableM12 connectorcontrol sensor wiringIP67 cable assemblysignal transmissionelectrical connectivityDIN 43650machine wiring连接器/电缆Connector/Cable机械和设备制造 连接器/电缆

上级产品

该组件会出现在以下整机或工业产品中。

控制传感器
用于监测和调节自动化输送机运行的电子设备
查看产品详情 ->
位置传感器/编码器
一种检测线性位置并将其转换为电信号，用于测量和控制的装置。
查看产品详情 ->
传感探头/传感头
速度传感器的检测元件，直接与目标物相互作用以测量旋转或线速度。
查看产品详情 ->

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Loose connector mating or vibration->Intermittent signal loss or open circuit->Use connectors with positive locking mechanisms (e.g., screw-lock, bayonet) and secure cable strain relief.
Exposure to moisture or chemicals->Corrosion of contacts leading to increased resistance or short circuits->Select IP67/IP68 rated connectors with appropriate seal materials and perform regular inspections in harsh environments.

工业生态与工程逻辑

兼容对象
PLC systemsIndustrial sensors (proximity, temperature, pressure)Data acquisition modulesMotor control units
可替换件
Phoenix ContactTE ConnectivityMolexHartingWeidmüller
0
Intermittent connections due to vibration
1
Signal degradation from EMI
2
Corrosion of contacts in humid environments
3
Mechanical damage from improper bending or crushing

合规与检测

tolerance
Contact resistance: <10 mΩ, insulation resistance: >100 MΩ at 500V DC
test method
Vibration testing per IEC 60068-2-6, IP rating testing per IEC 60529, electrical continuity and insulation resistance verification

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

添加你的工厂

制造商列表用于前期研究和供应商能力理解，不代表认证、排名或交易担保。

采购评估维度

不是客户评论，也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例，不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

磨料颗粒
Hard, sharp particles used in grinding wheels for material removal and surface finishing in industrial applications.
磨料入口端口
Abrasive inlet port is a precision component in blast chambers that controls abrasive media entry for surface treatment processes.
研磨层
Abrasive layer is the active surface component of grinding plates that performs material removal through friction and cutting action.
磨料介质/工作面
Abrasive media for surface finishing, polishing, and material removal in industrial applications.
检修盖
A removable cover providing access to internal components of a draft gear housing for maintenance and inspection.
样品室检修门
Access door for sample chambers providing secure entry while maintaining environmental isolation.

常见问题

What is the difference between M8 and M12 connectors for control sensors?

M8 connectors are smaller, typically used for compact sensors with lower power/signal requirements, while M12 connectors are more common for industrial sensors, offering more contacts and higher durability for standard applications.

How do I ensure EMI protection in sensor cables?

Use cables with braided or foil shielding and connectors with 360-degree shielding contact. Proper grounding of the shield at one end is essential to minimize electromagnetic interference in sensitive control systems.

我可以直接联系工厂吗？

CNFX 是开放目录，不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。
CNFX Industrial Component Index · 机械和设备制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估，不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息： 连接器/电缆

说明目标数量、应用场景、交期和关键技术要求，用于准备 RFQ 或供应商评估。

谢谢，信息已发送。
谢谢，信息已收到。

需要制造 连接器/电缆?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
连接区域
下一个组件
连接器/电缆接头
URN:CNFX:ME:UNIT:CONNECTOR_CABLE