A precision cylindrical housing in pneumatic/hydraulic cylinders that guides piston movement and contains pressurized fluid.
The cylinder tube is the primary structural component of a cylinder body that forms the pressure chamber, providing a smooth bore surface for piston sealing and movement. It maintains internal pressure integrity while withstanding mechanical loads from piston forces and external mounting stresses. Critical dimensions include bore diameter, wall thickness, straightness, and surface finish to ensure proper sealing and alignment.
该组件会出现在以下整机或工业产品中。
诱因 → 失效模式 → 工程缓解
不是客户评论，也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。
这些分值是采购评估维度示例，不代表真实客户评分、具体国家买家反馈或实时询盘。
Honed tubes have a precisely finished internal surface (Ra 0.2-0.8μm) for optimal sealing, while chrome plated tubes have a hard chromium layer (20-40μm) applied to the ID for enhanced wear and corrosion resistance. Many industrial cylinders use both processes.
Wall thickness is determined by operating pressure, safety factor (typically 4:1), material yield strength, and bore diameter. Use Barlow's formula: t = (P × D) / (2 × S × E) where P=pressure, D=bore, S=material strength, E=efficiency factor.
Scoring results from contamination, misalignment, inadequate lubrication, or piston seal failure. Prevention includes proper filtration (10μm or better), correct rod alignment, appropriate fluid viscosity, and regular maintenance of seals and wipers.
CNFX 是开放目录，不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。
CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。
说明目标数量、应用场景、交期和关键技术要求，用于准备 RFQ 或供应商评估。