行业组件数据 · 2026

隔膜/气囊

Flexible membrane in conservator tanks that separates transformer oil from air to prevent oxidation and moisture absorption.

技术定义与适配语境
典型 隔膜/气囊 会按材料、尺寸公差、适配关系和失效风险在 机械和设备制造 中评估。

A diaphragm or air bag is a flexible, impermeable membrane installed within conservator tanks of oil-filled transformers. It creates a physical barrier between the insulating oil and atmospheric air, allowing for thermal expansion and contraction of the oil while preventing direct contact with oxygen and moisture. This component maintains oil quality by eliminating oxidation, reducing sludge formation, and minimizing dielectric breakdown risks.

组件规格

定义
A diaphragm or air bag is a flexible, impermeable membrane installed within conservator tanks of oil-filled transformers. It creates a physical barrier between the insulating oil and atmospheric air, allowing for thermal expansion and contraction of the oil while preventing direct contact with oxygen and moisture. This component maintains oil quality by eliminating oxidation, reducing sludge formation, and minimizing dielectric breakdown risks.
工作原理
The diaphragm operates on the principle of flexible separation. As transformer oil heats up during operation, it expands into the conservator tank, compressing the air bag. During cooling, the oil contracts, and the diaphragm expands to maintain positive pressure, preventing air ingress. This dynamic movement accommodates volume changes while keeping the oil isolated from atmospheric contaminants.
材料
Typically made from nitrile rubber (NBR)ethylene propylene diene monomer (EPDM)or fluorocarbon elastomers (FKM) for chemical resistance. Reinforcement layers often include nylon or polyester fabric. Material selection depends on oil compatibilitytemperature range (-40°C to +100°C)and UV resistance requirements.
Diameter
300-2000 mm
Thickness
2-5 mm
Permeability
<0.1 g/m²/day
Volume Capacity
5-500 liters
Temperature Range
-40°C to +100°C
Operating Pressure
0-0.5 bar
标准
ISO 4633DIN 53504ASTM D2000

行业分类与别名

隔膜/气囊 的常用贸易名称、技术标识和检索关键词。

上级产品

该组件会出现在以下整机或工业产品中。

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Material aging from prolonged UV exposure->Cracking and loss of impermeability->Use UV-resistant materials and install protective covers
Chemical incompatibility with transformer oil additives->Swelling or hardening of diaphragm->Verify material compatibility through ASTM testing
Overpressure from blocked breather vents->Rupture and sudden air ingress->Install pressure relief valves and regular vent maintenance

工业生态与工程逻辑

0
Material degradation leading to oil contamination
1
Rupture causing air ingress and transformer failure
2
Improper installation resulting in leaks
3
UV exposure reducing lifespan

合规与检测

tolerance
±2% on dimensional specifications, leak-tight at 0.7 bar test pressure
test method
Pressure decay test per ISO 4633, material compatibility per ASTM D471

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

制造商列表用于前期研究和供应商能力理解,不代表认证、排名或交易担保。

采购评估维度

不是客户评论,也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例,不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

常见问题

How often should a diaphragm be replaced?

Typically every 10-15 years, but inspect annually for cracks, hardening, or permeability issues.

Can diaphragms be repaired?

No, damaged diaphragms must be replaced entirely to maintain seal integrity.

What causes diaphragm failure?

Common causes include material degradation from UV exposure, chemical incompatibility, mechanical fatigue from frequent cycling, or improper installation.

我可以直接联系工厂吗?

CNFX 是开放目录,不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。

CNFX Industrial Component Index · 机械和设备制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估,不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息: 隔膜/气囊

说明目标数量、应用场景、交期和关键技术要求,用于准备 RFQ 或供应商评估。

谢谢,信息已发送。
谢谢,信息已收到。

需要制造 隔膜/气囊?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
隔膜/气囊
下一个组件
隔膜/活塞
URN:CNFX:ME:UNIT:DIAPHRAGM_AIR_BAG