递增/递减逻辑

可编程逻辑控制器（PLC）或嵌入式系统组件，用于管理自动化存取系统、输送机路由和机器人定位的顺序地址生成。它根据输入信号实现数学算法以递增或递减内存地址，从而在工业环境中精确控制物料流向目的地。

基于二进制逻辑和状态机原理运行。接收触发信号（传感器输入、定时器脉冲或手动命令）并执行预编程的算术运算以修改地址寄存器。通常使用模运算进行循环寻址，边界检查用于范围限制，以及纠错算法。可根据系统配置实现线性、循环或自定义寻址模式。

Operates on binary logic and state machine principles. Receives trigger signals (sensor inputs, timer pulses, or manual commands) and executes pre-programmed arithmetic operations to modify address registers. Typically uses modulo arithmetic for circular addressing, boundary checking for range limits, and error correction algorithms. Can implement linear, circular, or custom addressing patterns based on system configuration.