行业组件数据 · 2026

沥青粘结剂

繁體:瀝青粘結劑

沥青粘结剂是一种热塑性碳基材料,源自煤焦油或石油,用作电极糊配方中的关键粘结剂。

技术定义与适配语境
典型 沥青粘结剂 会按材料、尺寸公差、适配关系和失效风险在 机械和设备制造 中评估。

沥青粘结剂是一种热塑性碳基材料,源自煤焦油或石油,在电极糊配方中作为关键粘结剂。它为碳质骨料提供内聚力,在电极柱生产过程中促进成型,并在焙烧过程中碳化形成固体碳基质,确保成品电极的结构完整性和导电性。 沥青粘结剂通过热塑性行为发挥作用——加热时(通常80-120°C)软化以包覆碳颗粒,冷却后硬化以粘结骨料。在后续焙烧(800-1200°C)过程中,它经历热解,转变为固体碳,在颗粒之间形成永久性结合,同时发展导电通路。

组件规格

定义
沥青粘结剂是一种热塑性碳基材料,源自煤焦油或石油,在电极糊配方中作为关键粘结剂。它为碳质骨料提供内聚力,在电极柱生产过程中促进成型,并在焙烧过程中碳化形成固体碳基质,确保成品电极的结构完整性和导电性。

沥青粘结剂通过热塑性行为发挥作用——加热时(通常80-120°C)软化以包覆碳颗粒,冷却后硬化以粘结骨料。在后续焙烧(800-1200°C)过程中,它经历热解,转变为固体碳,在颗粒之间形成永久性结合,同时发展导电通路。
工作原理
Pitch binder functions through thermoplastic behavior - it softens when heated (typically 80-120°C) to coat carbon particles, then hardens upon cooling to bind aggregates. During subsequent baking (800-1200°C), it undergoes pyrolysis, transforming into solid carbon that creates permanent bonds between particles while developing conductive pathways.
材料
煤焦油沥青(CTP)或石油沥青规格包括:软化点(80-120°C)结焦值(50-65%)喹啉不溶物含量(5-15%)甲苯不溶物含量(20-35%)灰分含量(<0.5%)硫含量(<0.8%)。
Density
1.25-1.35 g/cm³
Ash Content
<0.5%
Coking Value
50-65%
Sulfur Content
<0.8%
Softening Point
80-120°C
Toluene Insolubles
20-35%
Viscosity at 160°C
100-500 mPa·s
Quinoline Insolubles
5-15%
标准
ISO 6998ISO 8005DIN 51904DIN 51905

行业分类与别名

沥青粘结剂 的常用贸易名称、技术标识和检索关键词。

上级产品

该组件会出现在以下整机或工业产品中。

FMEA · 风险与缓解

诱因 → 失效模式 → 工程缓解

Inconsistent raw material quality->Variable electrode properties and performance->Implement strict supplier qualification and incoming material testing protocols
Improper heating temperature control->Inadequate binding or premature carbonization->Install precise temperature monitoring and control systems with alarms
Contamination during handling->Reduced electrode conductivity and strength->Establish clean handling procedures and segregated storage areas

工业生态与工程逻辑

0
Fire hazard during heating
1
Fume inhalation risk
2
Skin irritation on contact
3
Quality inconsistency in raw materials
4
Environmental contamination from spills

合规与检测

tolerance
±2°C for softening point, ±1.5% for coking value, ±0.1% for ash content
test method
ISO 6998 for coking value, ISO 8005 for softening point, DIN 51904 for quinoline insolubles, DIN 51905 for toluene insolubles

制造该组件的工厂

来自 CNFX 组件能力表的相关制造商资料。

制造商列表用于前期研究和供应商能力理解,不代表认证、排名或交易担保。

采购评估维度

不是客户评论,也不是实时热度。以下维度用于前期 RFQ 准备和供应商评估。

技术文档
4/5
制造能力
4/5
可检验性
5/5
供应商透明度
3/5

这些分值是采购评估维度示例,不代表真实客户评分、具体国家买家反馈或实时询盘。

相关组件

常见问题

What is the difference between coal tar pitch and petroleum pitch binders?

Coal tar pitch offers higher coking value and better graphitization properties, while petroleum pitch typically has lower impurity content and more consistent properties. Selection depends on electrode performance requirements and cost considerations.

How does pitch binder affect electrode performance?

Pitch binder quality directly impacts electrode density, strength, electrical conductivity, and thermal stability. Proper binder selection and processing ensure optimal electrode performance in high-temperature applications.

What safety precautions are needed when handling pitch binder?

Use proper ventilation, wear protective equipment (gloves, goggles, respirators), control dust generation, and implement fire safety measures due to pitch's combustible nature and potential health hazards from fumes.

我可以直接联系工厂吗?

CNFX 是开放目录,不是交易平台或采购代理。工厂资料和表单用于帮助你准备直接沟通。

CNFX Industrial Component Index · 机械和设备制造

数据基础

CNFX 制造商资料、技术分类、公开产品信息和持续合理性检查。

初步技术归类
本页用于结构化准备研究、RFQ 和供应商评估,不替代买方自己的供应商资质审查、标准核验和技术批准。

请求制造能力信息: 沥青粘结剂

说明目标数量、应用场景、交期和关键技术要求,用于准备 RFQ 或供应商评估。

谢谢,信息已发送。
谢谢,信息已收到。

需要制造 沥青粘结剂?

对比具备该组件加工或装配能力的制造商资料。

创建制造商档案 联系我们
上一个组件
沟槽衬垫
下一个组件
油封
URN:CNFX:ME:UNIT:PITCH_BINDER